Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 1. Kirjat ja opinnäytteet
  • Pro gradu -tutkielmat ja diplomityöt sekä syventävien opintojen opinnäytetyöt (kokotekstit)
  • Näytä aineisto
  •   Etusivu
  • 1. Kirjat ja opinnäytteet
  • Pro gradu -tutkielmat ja diplomityöt sekä syventävien opintojen opinnäytetyöt (kokotekstit)
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Analysing and experimenting the preparation of Gelatin Methacryloyl for 3D bioprinting

Alen, Niina (2022-05-10)

Analysing and experimenting the preparation of Gelatin Methacryloyl for 3D bioprinting

Alen, Niina
(10.05.2022)
Katso/Avaa
analysing_and_experimenting_the_preparation_of_gelma_for_bioprinting.pdf (2.519Mb)
Lataukset: 

Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.
avoin
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2022053141416
Tiivistelmä
The process of preparing Gelatin Methacryloyl (GelMA) is analysed and tested. The thesis begins with an overview of 3D bioprinting, optimal properties of materials used in 3D bioprinting, and an introduction of GelMA. The steps of preparing GelMA are then analysed based on literature and new ways of analysing the protocol are discussed.

The preparation of GelMA consists of the synthesis, filtering, freeze-drying, and the measurement of the degree of substitution. The synthesis is examined for technique and transparency. Two methods of filtering GelMA are then being analysed and tested. Dialysis is a widely used method of filtering GelMA but its duration lacks standardization. A method of determining when the dialysis is ready is being developed. Another filtering method, preparative cromatography, is tested. Chromatography is tested because it could be a faster filtering method compared to dialysis. The theory of freeze-drying is analysed next and the method is tested in action in the experimental section. Lastly, the method of measuring the degree of substitution is being analysed and tested.

As a result, all of the steps in the process of preparing GelMA are examined and an optimal method for the process is suggested. The analysis of preparing GelMA raised discussion and new ideas for further development and research.
Kokoelmat
  • Pro gradu -tutkielmat ja diplomityöt sekä syventävien opintojen opinnäytetyöt (kokotekstit) [9542]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste