Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Fermentation quality of ensiled crimped faba beans using different additives with special attention to changes in bioactive compounds

Erja Koivunen; Taina Jalava; Milla M. Leppä; Katariina Manni; Minna Kahala; Marketta Rinne; Kaisa Kuoppala; Juha-Pekka Salminen

Fermentation quality of ensiled crimped faba beans using different additives with special attention to changes in bioactive compounds

Erja Koivunen
Taina Jalava
Milla M. Leppä
Katariina Manni
Minna Kahala
Marketta Rinne
Kaisa Kuoppala
Juha-Pekka Salminen
Katso/Avaa
Final draft (626.2Kb)
Lataukset: 

ELSEVIER
doi:10.1016/j.anifeedsci.2020.114497
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2021042821083
Tiivistelmä
Faba bean (Vicia faba L.) is a grain legume that provides possibilities to increase local protein self-sufficiency both as feed and food in areas where possibilities for cultivation of other protein crops are limited. However, full ripening may not be achieved and storage of the moist beans by crimping and ensiling provides an economic alternative to drying, and is well suited for animal feeding. The objectives of the current experiment were to evaluate the effects of moisture content and various silage additives on the fermentation quality, aerobic stability and fate of bioactive compounds of ensiled crimped faba beans in a pilot scale ensiling experiment. Faba beans were combine harvested at moisture level of 443 g/kg and crimped prior to ensiling. The following additive treatments were applied using three replicates: 1) control (CON), 2) two commercial lactic acid bacteria inoculants as mixture (LABmix), 3) In-house LAB inoculant (LABLuke), 4) Formic acid based product (FA) and 5) Salt based product (Salt). Further, two of the additive treatments were prepared with additional moisture: 6) Control with tap water addition (CON + w) and 7) LABmix with tap water addition (LABmix + w). The beans ensiled without additive showed elevated pH, butyric acid and ethanol concentrations and proportion of ammonia N in total N. Addition of water further decreased the fermentation quality. The LAB inoculants improved the fermentation quality of the beans compared to CON. The fermentation was effectively restricted when FA was used. Both LAB and chemical additives improved aerobic stability compared to CON and Salt was especially effective in improving aerobic stability. Vicine disappeared totally during the ensiling period and also convicine was effectively degraded. It seems that promoting microbial activity in the silo either by LAB inoculation or increased moisture promoted the degradation of convicine, while chemical additives decreased the degradation of it. Total and particularly soluble proanthocyanidins were also degraded during the ensiling period. Crimping and ensiling is an alternative preservation method for faba beans which eliminates the energy consumption and investments required for drying. In addition, benefits regarding the concentrations of bioactive compounds may be expected.
Kokoelmat
  • Rinnakkaistallenteet [19207]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste