Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

An AI-in-Loop Fuzzy-Control Technique for UAV’s Stabilization and Landing

Immonen Eero; Rabah Mohammed; Haghbayan Hashem; Plosila Juha

An AI-in-Loop Fuzzy-Control Technique for UAV’s Stabilization and Landing

Immonen Eero
Rabah Mohammed
Haghbayan Hashem
Plosila Juha
Katso/Avaa
An_AI-in-Loop_Fuzzy-Control.pdf (2.478Mb)
Lataukset: 

Institute of Electrical and Electronics Engineers
doi:10.1109/ACCESS.2022.3208685
URI
https://ieeexplore.ieee.org/document/9899416
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2022102463075
Tiivistelmä

In this paper, an adaptable fuzzy control mechanism for an Unmanned Aerial Vehicle (UAV) to manipulate its mechanical actuators is provided. The mission (landing) for the UAV is defined to track (land on) an object that is detected by a deep learning object detection algorithm. The inputs of the controller are the location and speed of the UAV that have been calculated based on the location of the detected object. Two separate fuzzy controllers are proposed to control the UAV’s motor throttle and its roll and pitch over the mission and landing time. Fuzzy logic controller (FLC) is an intelligent controller that can be used to compensate for the non-linearity behaviour of the UAV by designing a specific fuzzy rule base. These rules will be utilized to adjust the control parameters during the mission and landing period in runtime. To add the effect of the ground for tuning the FLC membership function over the landing operation, a computational flow dynamic (CFD) modeling has been investigated. The proposed techniques is evaluated on MATLAB/Simulink simulation platform and real environment. Statistical analysis of the UAV location reported during stabilization and landing process, on both simulation and real platform, show that the proposed technique outperforms the similar state-of-art control techniques for both mission and landing control.

Kokoelmat
  • Rinnakkaistallenteet [19207]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste