Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Microreactor technology in experimental and modelling study of alcohol oxidation on nanogold

Eränen Kari; Salmi Tapio; Peurla Markus; Russo Vincenzo; Mastroianni Luca; Yu. Murzin Dimitri; Vajglová Zuzana; Di Serio Martino

Microreactor technology in experimental and modelling study of alcohol oxidation on nanogold

Eränen Kari
Salmi Tapio
Peurla Markus
Russo Vincenzo
Mastroianni Luca
Yu. Murzin Dimitri
Vajglová Zuzana
Di Serio Martino
Katso/Avaa
1-s2.0-S0009250922005048-main.pdf (1.921Mb)
Lataukset: 

Elsevier Ltd
doi:10.1016/j.ces.2022.117920
URI
https://doi.org/10.1016/j.ces.2022.117920
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2022091258702
Tiivistelmä

Selective oxidation of methanol, ethanol, 1-propanol and 1-butanol to corresponding aldehydes was performed in a microreactor in the presence of a Au/γ-Al2O3 coated catalyst. Nanoparticle size distribution, acidity, specific surface area and the average pore size as well as uniformity and thickness of the coating layer were evaluated with relevant characterization techniques. The experiments were designed to reveal the effect of temperature, residence time and oxygen-to-alcohol ratio on both alcohol conversion and product distribution. Stability and repeatability of the coating procedure was successfully demonstrated. To describe the reaction kinetics, plausible kinetic equations were implemented in a pseudo-homogeneous plug flow model, which turned out to be an adequate approximation to describe the flow pattern in the microreactor. Non-linear regression analysis enabled the determination of the rate and adsorption parameters included in the kinetic model. An advanced kinetic and mass transfer model was developed to reveal the impact of the diffusion inside the catalytic washcoat layer, confirming that molecular diffusion is not a limiting factor for alcohol oxidation in the microreactor.

Kokoelmat
  • Rinnakkaistallenteet [19207]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste