Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
  •   Etusivu
  • 3. UTUCris-artikkelit
  • Rinnakkaistallenteet
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Comparison of Linear and Nonlinear Methods for Distributed Control of a Hierarchical Formation of UAVs

Mohammad-Hashem Haghbayan; Juha Plosila; Anam Tahir; Jari M. Böling

Comparison of Linear and Nonlinear Methods for Distributed Control of a Hierarchical Formation of UAVs

Mohammad-Hashem Haghbayan
Juha Plosila
Anam Tahir
Jari M. Böling
Katso/Avaa
Publisher's PDF (2.759Mb)
Lataukset: 

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
doi:10.1109/ACCESS.2020.2988773
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2021042825396
Tiivistelmä
A key problem in cooperative robotics is the maintenance of a geometric configuration during movement. As a solution for this, a multi-layered and distributed control system is proposed for the swarm of drones in the formation of hierarchical levels based on the leader & x2013;follower approach. The complexity of developing a large system can be reduced in this way. To ensure the tracking performance and response time of the ensemble system, nonlinear and linear control designs are presented; (a) Sliding Mode Control connected with Proportional-Derivative controller and (b) Linear Quadratic Regular with integral action respectively. The safe travel distance strategy for collision avoidance is introduced and integrated into the control designs for maintaining the hierarchical states in the formation. Both designs provide a rapid adoption with respect to their settling time without introducing oscillations for the dynamic flight movement of vehicles in the cases of (a) nominal, (b) plant-model mismatch, and (c) external disturbance inputs. Also, the nominal settling time of the swarm is improved by 44 & x0025; on average when using the nonlinear method as compared to the linear method. Furthermore, the proposed methods are fully distributed so that each UAV autonomously performs the feedback laws in order to achieve better modularity and scalability.
Kokoelmat
  • Rinnakkaistallenteet [19207]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste