Design and Implementation of an Internet-of-Things-Enabled Smart Meter and Smart Plug for Home-Energy-Management System

Abstract

<p>The demand response program is an important feature of the smart grid. It attempts to reduce peak demand, improve the smart grid efficiency, and ensure system reliability. Implementing demand-response programs in residential and commercial buildings requires the use of smart meters and smart plugs. In this paper, we propose an architecture for a home-energy-management system based on the fog-computing paradigm, an Internet-of-Things-enabled smart plug, and a smart meter. The smart plug measures in real-time the root mean square (RMS) value of the current, frequency, power factor, active power, and reactive power. These readings are subsequently transmitted to the smart meter through the Zigbee network. Tiny machine learning algorithms are used at the smart meter to identify appliances automatically. The smart meter and smart plug were prototyped by using Raspberry Pi and Arduino, respectively. The smart plug’s accuracy was quantified by comparing it to laboratory measurements. To assess the speed and precision of the small machine learning algorithm, a publicly accessible dataset was utilized. The obtained results indicate that the accuracy of both the smart meter and the smart plug exceeds 97% and 99%, respectively. The execution of the trained decision tree and support vector machine algorithms was verified on the Raspberry Pi 3 Model B Rev 1.2, operating at a clock speed of 600 MHz. The measured latency for the decision tree classifier’s inference was 1.59 microseconds. In a practical situation, the time-of-use-based demand-response program can reduce the power cost by about 30%.</p>