Analysis of teaching laboratory using commercial motor design software
Vesterinen, Miro (2025-05-21)
Analysis of teaching laboratory using commercial motor design software
(21.05.2025)
Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.
avoin
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2025052150757
https://urn.fi/URN:NBN:fi-fe2025052150757
Tiivistelmä
The purpose of this thesis is to analyse teaching laboratory using commercial motor design software. During this thesis, the most common electrical motor in the industrial world, a three-phase induction motor, is analysed. This thesis focuses on a motor with a squirrel cage rotor. The first literature review presents the motor, tests for determining parameters for the motor model and the working principle of the motor.
De Lorenzo’s semi-automatic electric machines laboratory is used for experimental work. No-load, locked-rotor, load, and direct current resistance tests are conducted on the motor and measurements are taken. After that, the MATLAB program is coded to calculate the desired parameters. After that, the same motor is modelled with Simcenter SPEED by Siemens. Also, plots are created with data from MATLAB and SPEED. Parameter values between modelling and experimental are compared and analysed.
De Lorenzo’s semi-automatic electric machines laboratory is used for experimental work. No-load, locked-rotor, load, and direct current resistance tests are conducted on the motor and measurements are taken. After that, the MATLAB program is coded to calculate the desired parameters. After that, the same motor is modelled with Simcenter SPEED by Siemens. Also, plots are created with data from MATLAB and SPEED. Parameter values between modelling and experimental are compared and analysed.