Hyppää sisältöön
    • Suomeksi
    • In English
  • Suomeksi
  • In English
  • Kirjaudu
Näytä aineisto 
  •   Etusivu
  • 1. Kirjat ja opinnäytteet
  • Kandidaatin tutkielmat (kokotekstit)
  • Näytä aineisto
  •   Etusivu
  • 1. Kirjat ja opinnäytteet
  • Kandidaatin tutkielmat (kokotekstit)
  • Näytä aineisto
JavaScript is disabled for your browser. Some features of this site may not work without it.

Laser Powder Bed Fusion of copper alloy-based multi-materials: Manufacturing and process optimization : A Literature Review

Laurikainen, Kalle (2025-06-30)

Laser Powder Bed Fusion of copper alloy-based multi-materials: Manufacturing and process optimization : A Literature Review

Laurikainen, Kalle
(30.06.2025)
Katso/Avaa
Laser%20powder%20bed%20fusion%20of%20copper%20alloy%20based%20multi-materials%20-%20Kalle%20Laurikainen.pdf (516.7Kb)
Lataukset: 

Julkaisu on tekijänoikeussäännösten alainen. Teosta voi lukea ja tulostaa henkilökohtaista käyttöä varten. Käyttö kaupallisiin tarkoituksiin on kielletty.
avoin
Näytä kaikki kuvailutiedot
Julkaisun pysyvä osoite on:
https://urn.fi/URN:NBN:fi-fe2025070377222
Tiivistelmä
The advancement of multi-material additive manufacturing, particularly through laser powder bed fusion, presents significant potential for additive manufacturing. New technologies could enable production of copper alloy-based parts with enhanced mechanical and thermal functionality. This literature review investigates the current state of copper alloy/metal multi-material fabrication, focusing on the challenges of interfacial bonding, material compatibility, and process optimization. Copper alloys such as CuCrZr and Cu10Sn have been identified as promising candidates for integration with an assortment of steels due to their favorable laser absorption properties compared to pure copper. Despite successful demonstrations, manufacturing challenges persist, particularly due to copper’s high reflectivity and thermal conductivity. Key strategies, such as process parameter-, post-processing and scanning strategy optimization were analyzed across various studies. Effective interfacial bonding has been achieved through a multitude of techniques such as compositional gradient transitions, strategic scan path planning (e.g., staggered island and interlayer rotation), and post-processing heat treatments such as hot isostatic pressing and age hardening. Notably, this review highlights the lack of comprehensive research on wider array of material combinations. Additionally, porosity, surface roughness, and mechanical strength varied significantly across case studies depending on processing strategies and material combinations.
Kokoelmat
  • Kandidaatin tutkielmat (kokotekstit) [1760]

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste
 

 

Tämä kokoelma

JulkaisuajatTekijätNimekkeetAsiasanatTiedekuntaLaitosOppiaineYhteisöt ja kokoelmat

Omat tiedot

Kirjaudu sisäänRekisteröidy

Turun yliopiston kirjasto | Turun yliopisto
julkaisut@utu.fi | Tietosuoja | Saavutettavuusseloste